DMP Electronics Security Command 690 Uživatelský manuál stáhnout pdf (Strana 10)

LOOP STATUS

2. When LOOP STATUS? is displayed press any one of the

top four

select keys. The display will read ARM BYPS ALR NBR .

ARM

3. Press for a list of loops which are currently armed.

BYPS

Press for a list of loops which are currently bypassed.

ALR

Press for a list of loops which have tripped during the

current or previous armed period.

NBR

Press and LOOP: - will be displayed.

4. If NBR is selected enter the desired loop number and press .

The loop name will be displayed followed by its current status:

-OKAY = loop in normal condition

-BYPAS = loop is bypassed

COMMAND

User Code Level: None

Function: Displays a list of armed, bypassed, or alarmed loops; or

checks the

status of individual loops.

Loop Status can be used to give you a list of loops by category or

display the current status of an individual loop number. The three

categories are:

1) Armed Loops; loops which are currently armed.

2) Bypassed Loops; loops which are currently bypassed.

3) Alarmed Loops; loops which have tripped during the current

or previous armed period.

When Loop Status is selected you will be asked which kind of display

you want to see. If you choose one of the three categories, the list

of loops in that category will follow immediately, including loop

number and name. If you choose to enter an individual loop number

you will be asked for the specific number then the loop name and

status will be displayed.

Step By Step:

1. Press the key until LOOP STATUS? is

displayed.

COMMAND

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Žádné komentáře

DMP Electronics Security Command 690 Uživatelský manuál Strana 10