DMP Electronics XR500 SERIES Specifikace stáhnout pdf (Strana 167)

100

101

XTL/XTLN/XTLN-WiFi Panels:

The Device Setup window allows you to define the XTL/XTLN/XTLN-WiFi panel configuration. You can

install and address up to four wireless keypads.

Device Number: Enter the address number of the wireless keypad you are programming. The valid

range is 2-5.

Device Name: Enter the name you wish to assign to the wireless keypad. The name may be up to 16

characters long. If no name is entered, *UNUSED* is displayed.

To remove a keypad from the system, delete the device name by leaving this option blank.

Note: Do not remove the keypad if it is currently in use.

Serial Number: This option only displays when a device number is entered above. Enter the eight-

digit serial number found on the wireless keypad.

Supervision Time: Select the supervision time required for the wireless keypad. The wireless keypad

must check-in at least once during this time or a missing condition is indicated for that device. Select

60 or 240 minutes. Select None for unsupervised operation. Default is 240 minutes.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 335 336

Komentáře k této Příručce

Žádné komentáře

DMP Electronics XR500 SERIES Specifikace Strana 167

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu DMP Electronics XR500 SERIES