DMP Electronics XR500 SERIES Specifikace stáhnout pdf (Strana 211)

100

101

Program > Output Options

Cutoff Time: If you assign a Cutoff Output, then you may enter a Cutoff Time from 1 to 99 minutes

(in 1-minute increments) for the output to remain on. Enter 0 (zero) for continuous output.

Communication Fail Output: Enter the output number to turn on when the iCOMsl has attempted to

transmit a message for 60 seconds to the receiver without success. enter 0 (zero) to disable this

output. The default value is 0 (zero). The communication Fail Output turns off when communication

with the receiver restores.

Closing Wait Output: Enter the output number to turn on for four (4) seconds when Closing Wait is

programmed as YES and the iCOMsl successfully communicates the closing message at arming. If the

closing message does not communicate successfully, this output does not turn on.

Program > Output Information

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 335 336

Komentáře k této Příručce

Žádné komentáře

DMP Electronics XR500 SERIES Specifikace Strana 211

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu DMP Electronics XR500 SERIES